feat(issue#3 联调装备): tcpdump+CMPP pcap 时间线分析器(纯标准库)+cmpp_conn_accepted/ok 日志补盲——三场景自测与日志毫秒互证
This commit is contained in:
@@ -2,6 +2,15 @@
|
||||
|
||||
> 本仓 CHANGELOG 自重建起记(POC 明细见归档仓 /data/poc-archive/repos/go-sms.git 的 CHANGELOG.md,已冻结)。
|
||||
|
||||
## 2026-11-16(晚四)· Issue#3 联调装备:CMPP 抓包分析能力 + 连接日志补盲
|
||||
|
||||
- **背景**:客户重测在即,-1 类问题需「数据说话」——Connect 成功零日志+无抓包能力导致此前排查吃力(且上轮公网归因教训:通道表第一条即上游 5.16:7890,内网双 7890 并存,客户地址指向待确认)。
|
||||
- **抓包**:`apt install tcpdump 4.99.5`(新机原未装);`scripts/cmpp-capture.sh`(start/stop/status/analyze;`-i any -s 0 -C 50 -W 6` 环形 300MB 防打爆;**坑留痕:tcpdump 4.x 写 pcap 默认降权 tcpdump 用户致 Permission denied,须 `-Z root`**;PID 用 pgrep 管理+启动失败即报 stderr)。
|
||||
- **分析器**:`scripts/cmpp-analyze.py`(**纯 python 标准库零依赖**):pcap 魔数/纳秒自适应→链路层自适应(SLL/SLL2/以太+VLAN/RAW)→TCP 按 seq 重组(容重传/重叠)→CMPP PDU 按 TotalLength 切分;输出按连接分组时间线(时:分:秒.毫秒),CONNECT(sp/ver/ts)/CONNECT_RESP(**布局自动判定 21B=2.0/18B=3.0**+status 语义)/SUBMIT(srcid/码数/result)/DELIVER/心跳;**status≠0/result≠0 自动 ⚠️**;`analyze all` 合并环形切片。
|
||||
- **日志补盲**:server.go `cmpp_conn_accepted{client_ip}`(TCP 到达即留痕)+`cmpp_conn_ok{source_addr,client_ip,ver}`(Connect 成功留痕)——与抓包时间戳毫秒级互证,「客户连没连上」从此可追溯。
|
||||
- **自测实证**:三场景探针(本机正确密码 status=0/错误密码 status=2 ⚠️/上游 5.16 status=3 ⚠️)抓包时间线与 gateway 日志**毫秒级对齐**;顺带抓到 4 条上游通道连接心跳(运维流量可见)。
|
||||
- **联调 SOP**:`cmpp-capture.sh start` → 客户连 → `stop`+`analyze` → 30 秒出结论(到达与否/卡在哪步/谁拒绝/布局版本是否匹配);与 `cmpp_conn_*` 日志双通道互证。
|
||||
|
||||
## 2026-11-16(晚三)· Issue#3 追报:客户连公网 7890 非 本平台 + CMPP 版本协商 + 弹窗防截断
|
||||
|
||||
- **「登录仍报 -1」根因(网络层,非协议)**:探针对照实证——**公网 121.46.230.53:7890 是另一个 CMPP 网关**(回 Status=3 拒绝,本平台码值从不返回 3),s2demo 在彼处不存在;**本平台 CMPP 服务在内网 192.168.5.18:7890**(同请求 Status=0 鉴权通过)且 gateway 日志零客户连接记录(请求未达)。**结论:客户交付的连接地址指向公网机上的第三方/旧平台网关;本平台无公网 CMPP 入口。**解法=公网机 nginx 加 TCP stream 反代(7890 已被占用须用新端口如 17890→192.168.5.18:7890,需运维执行,配置片段已交付);过渡期客户可内网直连 192.168.5.18:7890。
|
||||
|
||||
@@ -279,6 +279,9 @@ func (s *Server) handleConn(ctx context.Context, conn net.Conn) {
|
||||
ss := &session{conn: conn}
|
||||
defer s.dropConn(conn, ss)
|
||||
ip := remoteIP(conn)
|
||||
// Issue#3 联调补盲:TCP 到达即留痕(此前 Connect 成功零日志,客户「连没连上」不可追溯;
|
||||
// 配合 scripts/cmpp-capture.sh 抓包分析双通道定位)。
|
||||
logger.L().Info("cmpp_conn_accepted", zap.String("client_ip", ip))
|
||||
|
||||
// ---- Connect 握手 ----
|
||||
_ = conn.SetReadDeadline(time.Now().Add(s.cfg.LoginTimeout))
|
||||
@@ -327,6 +330,10 @@ func (s *Server) handleConn(ctx context.Context, conn net.Conn) {
|
||||
if rl, ok := s.h.(SubmitRateLimiter); ok {
|
||||
ss.rate.limit = rl.SubmitRateLimit(sourceAddr)
|
||||
}
|
||||
// Issue#3 联调补盲:Connect 成功留痕(账号/IP/客户端声明版本——与抓包时间线互证)。
|
||||
logger.L().Info("cmpp_conn_ok",
|
||||
zap.String("source_addr", sourceAddr), zap.String("client_ip", ip),
|
||||
zap.Uint8("ver", ver))
|
||||
|
||||
// ---- 会话循环 ----
|
||||
for {
|
||||
|
||||
@@ -2,7 +2,7 @@
|
||||
|
||||
## 当前状态快照(2026-11-16,**Issue#3 三连修复+方案B 系统配置落地,S4 泳道收官,一期 18/27 计划日**)
|
||||
|
||||
- **Issue#3 追报闭环(2026-11-16 晚三)**:①「客户登录仍 -1」根因=**网络层**——探针对照实证公网 121.46.230.53:7890 是**另一个 CMPP 网关**(Status=3 拒绝),本平台 CMPP 在内网 192.168.5.18:7890(Status=0 正常)且日志零客户连接;**解法=公网机 nginx TCP stream 反代(7890 被占须用新端口 17890,运维项,配置片段已交付)/过渡期内网直连**;②CMPP **版本协商**加固(Connect.Version≥0x30 回 3.0 布局 18B/1B,否则 2.0 21B/4B)+**ISMG 串规范修正**(server 恒空 secret→ISMGSecretSource 接口掺账号 ApiSecret;严格客户端重算 ISMG 双版本均匹配);③系统配置弹窗防截断(align-center+append-to-body+92vw+62vh 内滚+select 两行选项+keyHint)。
|
||||
- **Issue#3 联调装备(2026-11-16 晚四)**:tcpdump 4.99.5 已装(坑:-Z root 防降权拒写);`scripts/cmpp-capture.sh`(start/stop/status/analyze,环形 300MB)+`scripts/cmpp-analyze.py`(纯标准库 pcap→CMPP 时间线,布局自动判定+异常⚠️);server.go 补 `cmpp_conn_accepted/cmpp_conn_ok` 日志(与抓包毫秒互证);三场景自测全对。**内网事实(数据说话)**:192.168.5.16:7890=上游网关(通道表 9102 对接点,对 s2demo 回 status=3 拒);192.168.5.18:7890=本平台(status=0 正常);平台零客户到达记录——**客户配置地址指向待其确认(疑 5.16/公网)**;重测 SOP=capture start→客户连→analyze,30 秒定位。
|
||||
|
||||
- **Issue#3 三连修复(2026-11-16 晚)**:①CMPP 连接报 -1 根因=`ConnectResp` 误按 **3.0 的 1B Status** 编码(标准 2.0 客户端按 4B 大端解析恒非 0)→ 修复=Marshal 4B(21B 包体)+AuthenticatorISMG 4B 参与 MD5+`ParseConnectResp` 自适应双布局(≥20B/2.0,17~19B/3.0);标准 2.0 探针真机实证 18B/垃圾值→21B/Status=0,**教训:2.0 与 3.0 在 CONNECT_RESP.Status/SUBMIT_RESP.Result 上互为镜像(2.0=4B/1B),自家 client+server 同源对称自测掩盖协议错位——同 Day39 坑**;②充值无响应=前端发 `{count}` 后端要 `{amount}`+submit 无 catch 静默吞错 → API/mock/组件三处修复;③SrcID 核验**用户裁定方案 C(前缀+动态扩展,行业惯例)**——s2demo 已配 ext_code=10690331(通道码即前缀),客户 SrcID 须以 10690331 开头+可追加扩展(≤21 位);真机四场景实证(纯码→10 过/码+扩展→10 过/不匹配→9/空→9);**运营口径:ext_code 变更后 30s 缓存生效(Day63 accCache)**。顺手修 TestClient_LoginOK 时序竞争(轮询吸收);门禁 -race 41 包/vitest 165/build 全绿;gateway 已串行部署(md5 比对 ✓)。
|
||||
- **仓库**:main 已推 Gitea;每日 bundle+push 双轨。
|
||||
|
||||
Executable
+257
@@ -0,0 +1,257 @@
|
||||
#!/usr/bin/env python3
|
||||
# cmpp-analyze.py — CMPP 联调 pcap 分析器(Issue#3 排查装备;纯标准库零依赖)
|
||||
#
|
||||
# 输入:tcpdump -i any 抓的 pcap(含环形切片);输出:按 TCP 连接分组的 CMPP 时间线
|
||||
# + 异常自动标记(status≠0/result≠0/RST/握手失败/未知命令)。
|
||||
# 用法:python3 cmpp-analyze.py <file.pcap> [--pkts]
|
||||
import struct
|
||||
import sys
|
||||
import time
|
||||
|
||||
|
||||
def fmt_ts(ts):
|
||||
t = time.localtime(ts)
|
||||
return "%02d:%02d:%02d.%03d" % (t.tm_hour, t.tm_min, t.tm_sec, int((ts % 1) * 1000))
|
||||
|
||||
# ---- CMPP 2.0 命令字 ----
|
||||
CMDS = {
|
||||
0x00000001: "CONNECT", 0x80000001: "CONNECT_RESP",
|
||||
0x00000002: "TERMINATE", 0x80000002: "TERMINATE_RESP",
|
||||
0x00000003: "SUBMIT", 0x80000003: "SUBMIT_RESP",
|
||||
0x00000004: "DELIVER", 0x80000004: "DELIVER_RESP",
|
||||
0x00000008: "ACTIVE_TEST", 0x80000008: "ACTIVE_TEST_RESP",
|
||||
}
|
||||
CONN_STATUS = {0: "成功", 1: "结构非法", 2: "账号密码错", 3: "版本/企业代码错",
|
||||
4: "IP白名单拒", 5: "账号停用", 8: "连接数超限"}
|
||||
SUBMIT_RESULT = {0: "成功", 1: "结构错", 8: "流量控制", 9: "通道号前缀不匹配", 10: "业务拒绝(余额/审核)"}
|
||||
|
||||
|
||||
def trim_zero(b):
|
||||
return b.rstrip(b"\x00").decode("utf-8", "replace")
|
||||
|
||||
|
||||
# ---- pcap 文件层(大小端/纳秒魔数自适应) ----
|
||||
def read_pcap(path):
|
||||
with open(path, "rb") as f:
|
||||
gh = f.read(24)
|
||||
if len(gh) < 24:
|
||||
raise SystemExit("pcap 头不足")
|
||||
magic = gh[:4]
|
||||
if magic == b"\xd4\xc3\xb2\xa1":
|
||||
end, nano = "<", False
|
||||
elif magic == b"\xa1\xb2\xc3\xd4":
|
||||
end, nano = ">", False
|
||||
elif magic == b"\x4d\x3c\xb2\xa1":
|
||||
end, nano = "<", True
|
||||
elif magic == b"\xa1\xb2\x3c\x4d":
|
||||
end, nano = ">", True
|
||||
else:
|
||||
raise SystemExit("非 pcap 文件(magic=%s)" % magic.hex())
|
||||
link = struct.unpack(end + "I", gh[20:24])[0]
|
||||
while True:
|
||||
rh = f.read(16)
|
||||
if len(rh) < 16:
|
||||
return
|
||||
ts_s, ts_f, incl, _orig = struct.unpack(end + "IIII", rh)
|
||||
data = f.read(incl)
|
||||
if len(data) < incl:
|
||||
return
|
||||
yield (ts_s + (ts_f / 1e9 if nano else ts_f / 1e6), link, data)
|
||||
|
||||
|
||||
# ---- 链路层 → IP(自适应 -i any 的 SLL/SLL2/以太+VLAN/RAW) ----
|
||||
def to_ip(link, data):
|
||||
if link == 1: # Ethernet(含 VLAN 堆叠)
|
||||
if len(data) < 14:
|
||||
return None
|
||||
eth, off = data[12:14], 14
|
||||
while eth == b"\x81\x00" and len(data) >= off + 4:
|
||||
eth, off = data[off + 2:off + 4], off + 4
|
||||
return data[off:] if eth == b"\x08\x00" else None
|
||||
if link == 101: # RAW IP
|
||||
return data
|
||||
if link == 113: # LINUX_SLL
|
||||
if len(data) < 16 or struct.unpack(">H", data[14:16])[0] != 0x0800:
|
||||
return None
|
||||
return data[16:]
|
||||
if link == 276: # LINUX_SLL2
|
||||
if len(data) < 20 or struct.unpack(">H", data[0:2])[0] != 0x0800:
|
||||
return None
|
||||
return data[20:]
|
||||
if link == 0: # NULL/LOOP
|
||||
return data[4:] if len(data) > 4 else None
|
||||
return None
|
||||
|
||||
|
||||
def parse_ip(data):
|
||||
if len(data) < 20 or (data[0] >> 4) != 4:
|
||||
return None
|
||||
ihl = (data[0] & 0xF) * 4
|
||||
if len(data) < ihl or data[9] != 6: # 仅 TCP
|
||||
return None
|
||||
src = ".".join(str(b) for b in data[12:16])
|
||||
dst = ".".join(str(b) for b in data[16:20])
|
||||
return src, dst, data[ihl:]
|
||||
|
||||
|
||||
def parse_tcp(data):
|
||||
if len(data) < 20:
|
||||
return None
|
||||
sport, dport, seq = struct.unpack(">HHI", data[0:8])
|
||||
off = (data[12] >> 4) * 4
|
||||
return sport, dport, seq, data[13], data[off:]
|
||||
|
||||
|
||||
# ---- 流重组:双向归并;载荷按 seq 排序去重拼接(容重传/重叠) ----
|
||||
def stream_key(src, sport, dst, dport):
|
||||
a, b = (src, sport), (dst, dport)
|
||||
return (a, b) if a <= b else (b, a)
|
||||
|
||||
|
||||
def reassemble(events):
|
||||
streams = {}
|
||||
for ts, key, d, seq, flags, payload in events:
|
||||
st = streams.setdefault(key, {"first": ts, "last": ts,
|
||||
"segs": [], "data": {0: [], 1: []}})
|
||||
st["last"] = ts
|
||||
st["segs"].append((ts, d, flags))
|
||||
if payload:
|
||||
st["data"][d].append((seq & 0xFFFFFFFF, payload))
|
||||
for st in streams.values():
|
||||
for d in (0, 1):
|
||||
buf, expect = bytearray(), None
|
||||
for seq, payload in sorted(st["data"][d], key=lambda x: x[0]):
|
||||
if expect is None or seq == expect:
|
||||
buf += payload
|
||||
elif seq < expect:
|
||||
skip = expect - seq
|
||||
if skip < len(payload):
|
||||
buf += payload[skip:]
|
||||
else:
|
||||
continue
|
||||
else:
|
||||
buf += payload # 缺块乱序:尽力拼接
|
||||
expect = (seq + len(payload)) & 0xFFFFFFFF
|
||||
st["data"][d] = bytes(buf)
|
||||
return streams
|
||||
|
||||
|
||||
# ---- CMPP PDU 切分与解码 ----
|
||||
def split_pdus(buf):
|
||||
out, off = [], 0
|
||||
while off + 12 <= len(buf):
|
||||
total = struct.unpack(">I", buf[off:off + 4])[0]
|
||||
if total < 13 or total > 65535:
|
||||
break
|
||||
if off + total > len(buf):
|
||||
break # 尾部截断(环形切片)
|
||||
out.append((struct.unpack(">I", buf[off + 4:off + 8])[0],
|
||||
struct.unpack(">I", buf[off + 8:off + 12])[0],
|
||||
buf[off + 12:off + total]))
|
||||
off += total
|
||||
return out, buf[off:]
|
||||
|
||||
|
||||
def dec_connect(body):
|
||||
return "sp=%s ver=0x%02x ts=%d" % (trim_zero(body[0:6]), body[22],
|
||||
struct.unpack(">I", body[23:27])[0])
|
||||
|
||||
|
||||
def dec_connect_resp(body):
|
||||
if len(body) >= 20:
|
||||
st, layout = struct.unpack(">I", body[0:4])[0], "2.0(4B)"
|
||||
ver = body[20] if len(body) > 20 else 0
|
||||
else:
|
||||
st, layout = (body[0] if body else -1), "3.0(1B)"
|
||||
ver = body[17] if len(body) > 17 else 0
|
||||
return "布局=%s(%dB) status=%d(%s) ver=0x%02x" % (
|
||||
layout, len(body), st, CONN_STATUS.get(st, "?"), ver), st
|
||||
|
||||
|
||||
def dec_pdu(cmd, body):
|
||||
name = CMDS.get(cmd, "UNKNOWN_0x%08x" % cmd)
|
||||
detail, bad = "", False
|
||||
if cmd == 0x00000001 and len(body) >= 27:
|
||||
detail = dec_connect(body)
|
||||
elif cmd == 0x80000001:
|
||||
detail, st = dec_connect_resp(body)
|
||||
bad = st != 0
|
||||
elif cmd == 0x00000003 and len(body) >= 140:
|
||||
n = body[116]
|
||||
ml = body[117 + 21 * n] if len(body) > 117 + 21 * n else -1
|
||||
detail = "srcid=%s %d码 %dB udhi=%d" % (trim_zero(body[95:116]), n, ml, body[45])
|
||||
elif cmd == 0x80000003 and len(body) >= 9:
|
||||
r = body[8]
|
||||
detail = "msgid=%d result=%d(%s)" % (struct.unpack(">Q", body[0:8])[0],
|
||||
r, SUBMIT_RESULT.get(r, "?"))
|
||||
bad = r != 0
|
||||
elif cmd == 0x00000004 and len(body) >= 65:
|
||||
detail = "src=%s report=%s" % (trim_zero(body[42:63]), "是" if body[63] == 1 else "否")
|
||||
return name, detail, bad
|
||||
|
||||
|
||||
def flags_str(f):
|
||||
s = ""
|
||||
if f & 0x02: s += "SYN "
|
||||
if f & 0x01: s += "FIN "
|
||||
if f & 0x04: s += "RST "
|
||||
return s.strip()
|
||||
|
||||
|
||||
def main():
|
||||
if len(sys.argv) < 2:
|
||||
raise SystemExit("用法: cmpp-analyze.py <file.pcap> [--pkts]")
|
||||
show_pkts, path = "--pkts" in sys.argv, sys.argv[1]
|
||||
events, skipped = [], 0
|
||||
for ts, link, data in read_pcap(path):
|
||||
ip = to_ip(link, data)
|
||||
if not ip:
|
||||
continue
|
||||
pr = parse_ip(ip)
|
||||
if not pr:
|
||||
continue
|
||||
src, dst, tcp = pr
|
||||
tp = parse_tcp(tcp)
|
||||
if not tp:
|
||||
continue
|
||||
sport, dport, seq, flags, payload = tp
|
||||
if sport != 7890 and dport != 7890:
|
||||
skipped += 1
|
||||
continue
|
||||
key = stream_key(src, sport, dst, dport)
|
||||
events.append((ts, key, 0 if (src, sport) == key[0] else 1, seq, flags, payload))
|
||||
if not events:
|
||||
print("无 7890 端口流量(过滤非 7890 包 %d 个)——确认客户端目标地址/端口。" % skipped)
|
||||
return
|
||||
streams = reassemble(events)
|
||||
print("=" * 96)
|
||||
print("pcap=%s | 连接数=%d | %.3f ~ %.3f" % (path, len(streams),
|
||||
events[0][0], max(e[0] for e in events)))
|
||||
print("=" * 96)
|
||||
for i, (key, st) in enumerate(sorted(streams.items(), key=lambda x: x[1]["first"]), 1):
|
||||
(s1, p1), (s2, p2) = key
|
||||
print("\n[连接%d] %s:%d ⇄ %s:%d" % (i, s1, p1, s2, p2))
|
||||
for d in (0, 1):
|
||||
pdus, tail = split_pdus(st["data"][d])
|
||||
a = (s1, p1) if d == 0 else (s2, p2)
|
||||
b = (s2, p2) if d == 0 else (s1, p1)
|
||||
t0 = next((t for t, dd, _ in st["segs"] if dd == d), st["first"])
|
||||
for cmd, sq, body in pdus:
|
||||
name, detail, bad = dec_pdu(cmd, body)
|
||||
print(" %s %s:%d→%s:%d %-14s seq=%-6d %s%s" % (
|
||||
fmt_ts(t0), a[0], a[1], b[0], b[1], name, sq, detail, " ⚠️" if bad else ""))
|
||||
if len(tail) >= 4:
|
||||
print(" %s %s:%d→%s:%d (尾段 %dB 未成完整 PDU)" % (fmt_ts(t0), a[0], a[1], b[0], b[1], len(tail)))
|
||||
if show_pkts:
|
||||
for ts, d, fl in st["segs"]:
|
||||
fs = flags_str(fl)
|
||||
if fs:
|
||||
side = key[0] if d == 0 else key[1]
|
||||
print(" %s TCP %-10s %s:%d" % (fmt_ts(ts), fs, side[0], side[1]))
|
||||
print("\n" + "=" * 96)
|
||||
print("⚠️=拒绝/异常码;CONNECT_RESP 布局自动判定(2.0=21B/3.0=18B)。")
|
||||
print("客户端报-1:先看 CONNECT_RESP.status 及布局是否匹配其版本;无本机流量=地址/端口未指向本平台。")
|
||||
|
||||
|
||||
if __name__ == "__main__":
|
||||
main()
|
||||
Executable
+97
@@ -0,0 +1,97 @@
|
||||
#!/usr/bin/env bash
|
||||
# cmpp-capture.sh — CMPP 联调抓包控制(Issue#3:客户连接报 -1 排查装备)
|
||||
#
|
||||
# 用法:
|
||||
# scripts/cmpp-capture.sh start [端口] # 后台抓包(默认 7890;可 'host x.x.x.x' 过滤)
|
||||
# scripts/cmpp-capture.sh stop # 停止
|
||||
# scripts/cmpp-capture.sh status # 运行状态/文件/当前 7890 连接
|
||||
# scripts/cmpp-capture.sh analyze [pcap] # 解析最新(或指定)pcap → CMPP 时间线
|
||||
#
|
||||
# 抓包口径:-i any(LINUX_SLL 链路层,分析器自适应)/ -s 0 全包(长短信 Submit ~3KB)
|
||||
# / -C 50 -W 6 环形 50MB×6 防打爆 / -tttt.n 微秒时间戳
|
||||
# 权限:sudo(sudoers NOPASSWD 已配);无 root 时提示降级方案(python 探针)。
|
||||
set -euo pipefail
|
||||
|
||||
CAP_DIR="/data/go-sms-v2/logs/capture"
|
||||
PID_FILE="$CAP_DIR/capture.pid"
|
||||
LOG_FILE="$CAP_DIR/tcpdump-stderr.log"
|
||||
|
||||
ensure_dir() { mkdir -p "$CAP_DIR"; }
|
||||
|
||||
running() { pgrep -x tcpdump >/dev/null 2>&1; }
|
||||
|
||||
cmd_start() {
|
||||
if running; then echo "已在运行(PID $(cat "$PID_FILE")),文件:"; ls -lh "$CAP_DIR"/*.pcap 2>/dev/null | tail -2; exit 0; fi
|
||||
ensure_dir
|
||||
local filter="${1:-7890}"
|
||||
local f="port ${filter}"
|
||||
# 传 host x.x.x.x 形式时原样作过滤器
|
||||
[[ "$filter" == *" "* ]] && f="$filter"
|
||||
local ts file
|
||||
ts=$(date +%Y%m%d-%H%M%S)
|
||||
file="$CAP_DIR/cmpp-$ts.pcap"
|
||||
if ! sudo -n true 2>/dev/null; then
|
||||
echo "ERROR: sudo 免密不可用,tcpdump 需 root(抓不了包;可用 python3 探针替代连通性探测)" >&2; exit 1
|
||||
fi
|
||||
# -Z root:tcpdump 4.x 写 pcap 默认降权 tcpdump 用户(目录无权→Permission denied)
|
||||
sudo -n nohup tcpdump -Z root -i any -s 0 -C 50 -W 6 -tttt -n -U -w "$file" "$f" > "$LOG_FILE" 2>&1 &
|
||||
sleep 1
|
||||
local pid
|
||||
pid=$(pgrep -x tcpdump | head -1 || true)
|
||||
if [[ -z "$pid" ]]; then
|
||||
echo "ERROR: tcpdump 启动失败:" >&2; cat "$LOG_FILE" >&2; exit 1
|
||||
fi
|
||||
echo "$pid" > "$PID_FILE"
|
||||
echo "抓包已启动: PID=$pid 过滤器='$f'"
|
||||
echo "文件: $file(环形 50MB×6)"
|
||||
echo "停止: scripts/cmpp-capture.sh stop ;分析: scripts/cmpp-capture.sh analyze"
|
||||
}
|
||||
|
||||
cmd_stop() {
|
||||
if ! running; then echo "未在运行"; rm -f "$PID_FILE"; exit 0; fi
|
||||
sudo -n pkill -x tcpdump 2>/dev/null || pkill -x tcpdump 2>/dev/null || true
|
||||
sleep 1
|
||||
rm -f "$PID_FILE"
|
||||
echo "已停止。最近文件:"
|
||||
ls -lht "$CAP_DIR"/*.pcap* 2>/dev/null | head -3
|
||||
echo "分析: scripts/cmpp-capture.sh analyze"
|
||||
}
|
||||
|
||||
cmd_status() {
|
||||
if running; then
|
||||
echo "运行中 PID=$(cat "$PID_FILE")"
|
||||
else
|
||||
echo "未在运行"
|
||||
fi
|
||||
ls -lht "$CAP_DIR"/*.pcap* 2>/dev/null | head -3 || echo "(无 pcap)"
|
||||
echo "--- 当前 7890 连接(含出向)---"
|
||||
ss -tn 2>/dev/null | grep ':7890' || echo "(无)"
|
||||
tail -3 "$LOG_FILE" 2>/dev/null || true
|
||||
}
|
||||
|
||||
cmd_analyze() {
|
||||
local mode="${1:-}"
|
||||
ensure_dir
|
||||
# 环形切片 .pcapN:默认分析最新单片;all=cat 全组(按编号序)到临时文件合并分析
|
||||
local f newest group
|
||||
f=$(ls -t "$CAP_DIR"/*.pcap* 2>/dev/null | head -1 || true)
|
||||
if [[ -z "$f" ]]; then echo "ERROR: 无 pcap 文件(先 start)" >&2; exit 1; fi
|
||||
if [[ "$mode" == "all" ]]; then
|
||||
group="${f%.pcap*}.pcap"
|
||||
local merged="/tmp/cmpp-merged-$$.pcap"
|
||||
cat "$group" "$group"[0-9]* 2>/dev/null > "$merged" || cat "$group"* > "$merged"
|
||||
echo "(合并 $(ls "$group"* 2>/dev/null | wc -l) 个切片 → $merged)"
|
||||
python3 /data/go-sms-v2/scripts/cmpp-analyze.py "$merged"
|
||||
rm -f "$merged"
|
||||
else
|
||||
python3 /data/go-sms-v2/scripts/cmpp-analyze.py "$f"
|
||||
fi
|
||||
}
|
||||
|
||||
case "${1:-status}" in
|
||||
start) shift || true; cmd_start "$@" ;;
|
||||
stop) cmd_stop ;;
|
||||
status) cmd_status ;;
|
||||
analyze) shift || true; cmd_analyze "$@" ;;
|
||||
*) echo "用法: $0 {start [端口|过滤式]|stop|status|analyze [pcap]}"; exit 1 ;;
|
||||
esac
|
||||
Reference in New Issue
Block a user